Seentech UPGRADED 137221600 Washer Drain Pump Kit – Compatible for Electrolux KENMORE Frigidaire Washer – Replace 137108100 AP5684706 134051200 134740500 134740800 137108100 137151800

Seentech UPGRADED 137221600 Washer Drain Pump Kit – Compatible for Electrolux KENMORE Frigidaire Washer – Replace 137108100 AP5684706 134051200 134740500 134740800 137108100 137151800

Specification:
The pump motor is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.
This part works with the following brands: Frigidaire, Electrolux, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

Works with the following models:
Electrolux: PTF7012MW1, SATF7000FS0, SATF7000FS1, STF7000FS0, etc

Kenmore: 41744052400, 41744052401, 41744052500, 41744082400, 41744082500, 41744092500, 41744152400, 41744152401, 41744152500, 41744252500, 41744252501, 41748102700, 41748102701, 41748106700, 41748112700, 41748112701, 41748116700…

Gibson: CWS445RGS1, DWS445RHS0, DWS445RHS1, GES831AS1, GES831AS2, GES831CS0, GLSG62RFW0, GLSG62RHS0, etc

Frigidaire: 970L48022A0, ATF6000ES0, ATF6000ES1, ATF6000FS0, ATF6000FS1, ATF6000FS2, ATF6500FG0, ATF6500GG0, ATF6500GG1, ATF6500GS0, ATF6700FE0, ATF6700FE1, ATF6700FE2, ATF6700FS… Instruction when replacement:
The tools needed for this repair project is a putty knife, Phillips and flat blade screw driver, 1/4 inch nut driver, and needle nose pliers. Remember to unplug washing mechine from power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions.
1. Disconnect all electrical & hydraulically net work for washing machine.
2. Empty all contents and also any inner water.
3. Disassemble the defective drain pump from impeller/filter/machine shaft include the electrical & Hydraulically connection.
4. Install with carefully at the same place the new Drain pump motor with also new gasket, the eventual bracket and protection for water.
5. Shut the screws to avoid clasp excessively so that not ruin the threads.
6.Repair the electrical & hydraulic connection for the drain pump, by verify and supervise the correct working of the machine, executing a washing-drying cycle

About this item:
– FITS TOP NAME BRANDS: This kit is a direct replacement for the drain pump on your Whirlpool Kenmore Maytag washing machine drain pump 137221600.
– REPLACEMENT PART No: 137221600 TJ137108100 131724000 134051200 134051200 134740500 134740800 137108100 137151800 137151800KITK 137151900 137151900KITK ER137108100.
– PRODUCT SPECIFICATIONS – The pump removes water from the washer during the drain portion of the cycle. The product specs of this washer drain pump are: Frequency: 60Hz, Watts: 85W and Voltage: 120V.
– EASY DIY FIX: This repair takes 30 to 60 minutes to complete on your own, but it still beats the cost and hassle of a repair call. You’ll just need a Phillips screwdriver, pliers, towel, needle nose pliers, and small flathead screwdriver.
– 𝗖𝗢𝗡𝗙𝗜𝗗𝗘𝗡𝗧 𝗣𝗨𝗥𝗖𝗛𝗔𝗦𝗘𝗦: Enjoy a 30-day return window on your purchase. Your satisfaction is our priority. If you have any questions, please don’t hesitate to contact our customer service team.

Replaces part numbers: 137221600

Condition: New: This item is brand new, unused, unopened, and in its original packaging. It has never been worn or used and is in perfect condition, just as received from the manufacturer.